產品介紹packing machine
該機伺服電機驅動，沖裁頻率8O-200次分鐘、360萬粒/班，(5板/次、10粒/板:150次/分鐘、
8小時/班) :高產、低耗為您節省投資，降低運行(包裝)成本。
2.外形美觀，全部不銹鋼蒙面，全封閉，符合制藥行業GMP生產要求，質量可靠，運行穩定，
可按不同生產規模進行選型。
1.This machine is driven by servo motor, blanking frequency 80-200 times per minute,
3.6 million grainsper shift (5 boards per time,10 grains per plate: 150 times per minute,
8 hours per shift) : high production and low consumption can save the cost of your
investment and reduce the cost of operation (packaging).
2.With its beautiful appearance, all stainless steel masked, completely closed, conform
to the pharmaceutical industry GMP production requirements, reliable quality, stable
operation, can be selected according to different production scale.
包裝范圍packing contains
醫藥、食品、化妝品等行業的膠囊、片劑的包裝。
pharmaceutical, food, cosmetics and other industries capsule, tablet packaging.
產品特點packing machine
板式正壓吹塑成型,輥式熱封，包裝效率高，外形美觀;
2.可與通用上料機、掉頭上料機、圓盤振動上料機配套使用;
3.人機界面，PLC控制，無級變頻調速，伺服電機驅動，高速范圍沖裁80-200次/分鐘，(沖切）﹔
注:根據板型長度，決定沖切次數;
4.視覺檢測:采用國際品牌，檢測精度高;
5.報警:無料報警、門禁報警、溫度報警、氣壓報警、循環水報警;
6.加熱方式:內熱式加熱，自動控溫;
7.具有長充填平臺，可提高成品率，可加裝傳送帶;
8.冷卻方式:循環水或自來水(外接);
9.沖切無廢料，節省包材10%。
1. Plate type positive pressure blow molding, roller type heat seal, high packaging efficiency,
beautiful appearance;
2. lt can be used together with general feeding machine, reverse feeding machine and disc
vibrating feeding machine;
3.Human-machine interface,PLC control frequency conversion speed regulation, servo motor
drive, high speed range blankng 80-200 times/min,(blanking); Note: According to the length of
the plate, determine the number of punching;
4.Visual detection: using international famous brand, with high detection accuracy;
5. Alarm: no material alarm, access control alarm, temperature alarm, air pressure alam, water
circulating alarm;
6.Heating mode: internal heating, automatic temperature control;
7. lt has a long filling platform, which can improve the yield rate and can be equipped with
conveyor belt;
8.Cooling method: circulating water or tap water(external connection);
9.No waste material for washing and cutting, which can save 10% of wrapping material.
